Universal Suction Cup Type Shower no drilling Mounting Bracket for Bathroom Faucet Stand

Name: Shower HolderMaterial: ABSSize: 6cm*8cm*5.5cmProcessing method: ElectroplatingColor:Black , Gray , SilverPackaging content: 1 shower holder (excluding other accessories)Note: Due to manual measurement, there may be some errors in the size. The actual size should be based the physical objectDue to different lighting conditions, the actual color may be slightly different from the picture. To ensure accuracy, please refer to the physical objectEasy to install,which is convenient to use.

• The wall surface must be dry, smooth, free of dust and oil stains. Preferably use tiles, glass, and marble. It is not recommended for uselatex paint, wallpaper, or rough cement surfaces
• After installation, let it stand for 12 to 24 hours before use. Allow the adhesive to fully cure to avoid detachment under force upon initial application
• Avoid installing in areas exposed to direct hot water spray or high-temperature exposure for long periods. This can prevent the adhesive from softening and losing its effectiveness.
• The load-bearing capacity is limited. Only fix regular shower heads. Do not hang heavy objects or towels to prevent falling and damage
• If you need to dismantle, you can use a hair dryer to heat and soften the adhesive layer, then slowly peel it off to reduce residual adhesive and damage to the wall surface
• Suitable to hold hand shower and bidet sprayer.